How Much Does Furnace Replacement Cost in Salt Lake City? (2026 Guide)
Most homeowners want to know what a furnace repair will cost before they call. At Zephyr Heating and Cooling LLC, we’ve repaired furnaces for Salt Lake area families since 2010. In this guide, we’ll walk you through common repair prices, what affects your final bill, and how to tell when replacing your furnace makes more sense.
Average Furnace Repair Costs in SLC
Most furnace repairs in Salt Lake City cost $150 to $800, plus a $75 to $125 diagnostic fee that is often applied toward the repair. Minor fixes like a flame sensor or igniter cost the least, while a heat exchanger repair can reach $2,000 or more. Here are typical 2026 price ranges across the Salt Lake Valley:
Swipe sideways to see all prices →
| Repair Type | Common Examples | Typical Cost |
|---|---|---|
| Diagnostic / service call | Full system inspection | $75–$125Often applied to the repair |
| Minor repairs | Igniter, flame sensor, capacitor | $150–$350 |
| Mid-range repairs | Blower motor, control board, draft inducer motor | $400–$800 |
| Major repairs | Heat exchanger, secondary heat exchanger | $800–$2,000+ |
Need an exact price? We'll diagnose your furnace and quote the repair before any work starts.
Schedule Furnace RepairFive things that legitimately move the price
Five factors shape the cost of a new furnace in Salt Lake City: sizing for altitude, efficiency level, venting changes, permits and code work, and ductwork repairs. We explain each one upfront, so your quote reflects the real job and nothing gets added later.
Sizing for Salt Lake City's Altitude
Salt Lake City sits around 4,300 feet. At that elevation, a gas furnace puts out roughly 4% less heat per 1,000 feet unless it's set up for high altitude. We size and adjust every furnace for local conditions, not sea-level specs.
Efficiency Level
Single-stage, two-stage, and modulating furnaces cost more as comfort and efficiency go up. Higher tiers keep room temperatures steadier and can lower gas bills. We show you the real payback for your home, so you know if the upgrade is worth it.
Venting Changes
Upgrading from an older 80% furnace to a 95%+ high-efficiency model usually needs new PVC venting and a condensate drain line. It adds to the upfront cost, but the higher efficiency lowers your gas bill every month after.
Permits, Gas, and Electrical Work
A safe install includes permits, a gas line check, an electrical disconnect, and updates to meet current code. Zephyr includes this work in your quote from the start, so you won't see surprise charges after the job begins.
Ductwork Repairs
Even a new furnace can't keep your home comfortable if the ducts are leaky or undersized. If your ductwork needs repairs, we show you photos of the problem and price the fix before any work starts.
What Should Never Raise Your Price
Sales commissions, monthly quotas, and "today only" discounts have nothing to do with your home. If a quote comes with pressure to sign right away, slow down. Zephyr gives free, no-pressure estimates so you can compare with confidence.
Get a Free Second OpinionHow Much Do Common Furnace Repairs Cost in Salt Lake City?
The most common furnace repairs in Salt Lake City are igniter replacement, blower motor replacement, and heat exchanger repair. Prices range from about $150 for an igniter to $2,500 for a heat exchanger, including parts and labor. Here’s what each repair involves, what it costs in 2026, and when it’s worth doing.
Igniter Replacement Cost
An igniter replacement typically costs $150 to $300 in Salt Lake City, including parts and labor. The igniter lights the gas inside your furnace. When it fails, the blower still runs, but your vents blow cold air instead of heat.
- Part cost: $20–$80
- Total cost: $150–$300
- Typical lifespan: 4–7 years for hot surface igniters
- Repair time: usually under an hour
This is one of the most affordable furnace repairs, and it’s almost always worth fixing, even on an older furnace.
Heat Exchanger Repair Cost
A heat exchanger repair typically costs $800 to $2,500 in Salt Lake City. The heat exchanger keeps combustion gases, including carbon monoxide, separate from the air you breathe. A crack can let those gases leak into your home, which makes it the most serious furnace problem.
- Part cost: $200–$1,500, depending on brand and model
- Total cost: $800–$2,500
- Warranty: many manufacturers cover heat exchangers for 20 years or longer, so check yours before paying
If a technician confirms a cracked heat exchanger, they will usually shut the furnace off for safety. This is called “red-tagging.” Don’t try to run the furnace until it’s fixed, especially in a tightly sealed home during winter. If your furnace is more than 15 years old, replacement is usually the better choice.
Blower Motor Replacement Cost
A blower motor replacement typically costs $400 to $800 in Salt Lake City. The blower motor powers the fan that pushes warm air through your ducts. Warning signs include weak airflow, squealing or grinding noises, and a furnace that shuts off before your home warms up.
- Part cost: $100–$450
- Total cost: $400–$800
- Variable-speed ECM motors: $600–$1,200, since they’re used in higher-efficiency furnaces
A new blower motor usually makes sense on a furnace under 12 years old. On an older system, compare the repair cost with how many years the furnace has left.
Should You Repair or Replace Your Furnace?
Use the $5,000 rule to decide whether to repair or replace your furnace. Multiply the repair cost by your furnace’s age in years. If the total is more than $5,000, replacement is usually the smarter investment. If it’s less, a repair is often the better value. Zephyr Heating and Cooling LLC walks through this math with you on every service call.
Example: a $600 blower motor repair on a 12-year-old furnace equals 600 × 12 = $7,200. That points toward replacement.
Other factors to weigh for Salt Lake City homes:
- Efficiency: older furnaces often run at 80% AFUE or less, while new high-efficiency models reach 95% to 98%. That difference can noticeably lower winter gas bills.
- Rebates: Enbridge Gas Utah’s ThermWise program may offer rebates on qualifying high-efficiency furnaces. Check current amounts before you buy.
- Insulation: a new furnace works best in a well-insulated home. Upgrading insulation at the same time helps you get more from your investment.
- Repair history: if your furnace has needed two or more repairs in three years, more breakdowns are likely.
Frequently Asked Questions
Why is my furnace repair quote higher than prices I saw online?
Online prices are often national averages. In Salt Lake City, your quote depends on local labor rates, part availability, and your furnace’s make and model. Parts for older or discontinued models can take longer to find. For repairs over $400, getting a second estimate is a smart move.
How long does a furnace repair take?
Simple repairs like an igniter, flame sensor, or capacitor usually take one to two hours. Blower motor and control board replacements often take two to three hours. Heat exchanger work can take four to six hours and may need a second visit if parts must be ordered.
What does a furnace warranty cover?
Most furnaces include a 5- to 10-year parts warranty, and many heat exchangers are covered for 20 years or longer. Labor is usually covered only for the first year, if at all. Many manufacturers reduce coverage if you don’t register the furnace within 60 days of installation.
What is the most common furnace repair in Salt Lake City?
Igniter and flame sensor problems are among the most common furnace repairs in Salt Lake City. Both parts wear out with regular use and can stop your furnace from producing heat. Luckily, they’re also some of the most affordable fixes, usually costing $150 to $300 with parts and labor.
Is it worth repairing a 15- or 20-year-old furnace?
A small repair, like an igniter or flame sensor, is often still worth it on an older furnace. A major repair, like a heat exchanger or blower motor, usually isn’t. Use the $5,000 rule: multiply the repair cost by the furnace’s age. If the total is over $5,000, replacement is usually the better value.


